新马铃薯培土器 Jagoda Inter-Row Hydraulic Vegetable Weeder ZUZA 3

ZUZA 3 machine is designed for mechanical weed control in crops growing in rows, at a spacing to allow passage of a tractor on a cultivated lane. The machine is perfect for “organic farming”, can significantly reduce or even eliminate the use of herbicides in the orchard. This reduces the cost of maintenance and facilitates keeping these crops

 ZUZA 3 is adapted for weeding rows of vegetable crops, flowers, lavender, lettuce, rhubarb, asparagus and such young currants, strawberries, youngberries and other plants up to a height of 0.5 meter.

The head specification:
 Heads cultivator has three pairs of spring claw (or/and vertical knives) that destroy weeds. The knives recommended being used on stony and hard soil.
 There are two sizes of head cultivator ( small 225 mm and big 300 mm)
 Single-row with the possibility of shifting the axle of the tractor to the right or to the left by approx. 40 cm

Optional:
1- Joysticks control instead of mobile arms with 2 hydraulic cylinders in each row to eliminate the requirement of physical strength and increase the working hours on the device ( All Versions)

optional:
2- The internal hydraulic kit is equipped with hydraulic power kit equipped with (storage oil tank 75 liters + multiplier + pump + 75 liters oil tank + cooling radiator) for eliminating the overheating risk as the cooling system inside the machine maintains the proper temperature of the hydraulic system and increases the working hours on the device with high efficiency without using the hydraulic pump of the tractor. (All versions)

optional:
3- The hydraulic displacement between rows for double and triple-row. The mechanical hydraulic weeder can fit the different distances between rows by using hydraulic cylinders

Version Single Double Triple -Rows
Shipment Width (cm): 124 cm 240 cm 260 cm
Max Working Width (cm) 155 cm 300 cm 430 cm
Length (cm): 222 cm 222 cm 222 cm
Height (cm): 215 cm 215 cm 215 cm
Weeding Depth: 1-4 cm 1-4 cm 1-4 cm
Weight : 250 kg 470 kg 800 kg
Weeding Head Size 22.5 or 30 cm
Working Speed 1 - 3 km/h
Oil Requirement (l/min) 20 l/min or PTO 540 rpm // 40 l/min or PTO 540 rpm // PTO 540 rpm
Adjustment To The Row Spacing Shifting the axle of the tractor by 20 cm each side Optional
Hydraulic Cylinders Optional
Hydraulic Cylinders
Mounting method (Rear) 3-point Linkage- CAT 2 3-point Linkage- CAT 2 3-point Linkage- CAT 2